IAD132E(T)
【字体: IAD132E(T)

IAD132E(T)   English Introduction
The IAD132E(T) interconnects with the SoftCo through the standard SIP protocols and provides 16FXS, 32FXS, 8FXO+8FXS, 8FXO+24FXS or 16FXO+16FXS
如需购买 华为IAD132e(t) 欢迎联系我们,华为IAD全系列均有现货供应,大量货存,价格优势.If you want to buy Huawei IAD VoIP Gateway please contact us

phone :+86 13424004466  +86 757 85586477 or email:voip@163.com  公司电话0757-85586477 业务主管:13424004466 郭先生

如需阅读中文资料,详细的IAD132 中文介绍页面网址:/Item/Show.asp?m=1&d=938 或者直接联系我们.
interfaces.Product Positioning
As a terminal device at the edge access layer of HUAWEI unified communications, the IAD132E(T) is widely used on the unified communications network. By adopting the standard voice codec and compression techniques, the IAD132E(T) encodes voice signals, encapsulates them into IP packets, and then sends the IP packets to a specified media gateway through the IP network. After the IP packets reach the destination, the destination IAD performs the reverse processing to restore the packets into voice signals. In this way, the VoIP and FoIP functions are achieved.

The IAD132E(T) can provide 16FXS, 32FXS, 8FXO+8FXS, 8FXO+24FXS or 16FXO+16FXS interfaces according to the actual hardware configuration, and provide three 10Base-TX or 100Base-TX interfaces for cascade connection. The IAD132E(T) is applicable to low-density areas such as small enterprises and residential communities.

Figure 2-15 shows the networking involving the IAD132E(T) and the SoftCo.

Figure 1-1 Networking involving the IAD132E(T) and the SoftCo

查看原图



Main Functions

The IAD132E(T):

  • Connects POTS users to the IP network.
  • Supports T.38 fax service and transparent fax transmission.
  • Supports transparent transmission of modem signals.
  • Supports the PPPoE.
  • Supports the traditional PSTN phone services, such as calling line identification presentation (CLIP), call forwarding, and call waiting.
  • Cooperates with the SoftCo to obtain intelligent and feature services, such as the RBT, ONLY service, and card service.
  • Provides FXO analog trunks by FXO and FXS Unit (OSU).

Product Appearance

Figure 2-16 shows the appearance of the IAD132E(T).

Figure 1-2 Appearance of the IAD132E(T)

 

 



Technical Specifications

Table 2-7 lists the technical specifications of the IAD132E(T).

Table 1-1 Technical specifications of the IAD132E(T)

 

 

 

Parameter
Specification
User capacity
16 POTS users (one ASID board is required)
32 POTS users (two ASID boards are required)
8 analog trunks, 8 POTS users (one OSU board is required)
16 analog trunks, 16 POTS users (two OSU boards are required)
8 analog trunks, 24 POTS users (one ASID board and one OSU board are required)
Call put-through rate
> 99%
MTBF
> 3.4 years
Dimensions
436 mm in width, 365 mm in depth, and 42 mm in height
Weight
5 KG
Power voltage and frequency
100-240 V AC, 50 Hz or 60 Hz
Maximum power consumption
86 W

If you want to buy Huawei IAD VoIP Gateway please contact us

phone :+86 13424004466  +86 757 85586477 or email:voip@163.com
如需阅读中文资料,详细的IAD132 中文介绍页面网址:/Item/Show.asp?m=1&d=938 或者直接联系我们.

 

如需购买华为IAD语音网关 请与我们联系 13424004466 公司电话 0757-85586477 电子邮件 voip@163.com
 

华为IAD全系列 均有货。价格优惠,货源优势提供。


 

佛山格威通讯设备有限公司 All Rights Reserved 13424004466 服务遍天下 
主营:华为IAD网关/中兴/奥科/等VOIP语音设备,企业/公司IPPBX定制(MGCP协议/SIP协议),深圳0755号码安装,MGCP协议网络电话,集团/公司voip网络电话安装