MP-112 | MP-114 & MP-118 | MP-124D |
Voice Ports | 2 ports | 4 and 8 ports | 24 ports | |
Telephone Interfaces | FXS, RJ11 | FXS, FXO or mixed FXS/FXO, RJ11 | FXS, 50-pin Telco | |
Lifeline | Automatic cut through of a single analog line | |||
Network Interface | 10/100 BASE-TX, RJ45 | |||
Indicators | Channel status and activity LEDs |
Voice over Packet Capabilities |
G.168-2004 compliant Echo Cancellation, VAD, CNG, Dynamic programmable Jitter Buffer, modem detection and auto switch to PCM |
Voice Compression | G.711, G.723.1, G.726, G.729A, EG.711, G.722 |
Fax over IP |
T.38 compliant Group 3 fax relay up to 14.4 kbps with automatic switching to PCM or ADPCM |
3-Way Conference | 3-Way conference with local mixing |
QoS | DiffServ, TOS, 802.1 p/Q VLAN tagging |
IP Transport | RTP/RTCP per IETF RFC 3550 and 3551 PPPoE, ThruPacketTM (aggregated RTP streams of several channels for saving network bandwith) |
Signaling | FXS Loop-start | FXS, FXO Loop-start | FXS Loop-start |
In-band Signaling |
|
||
Out-of-Band Signaling | DTMF Relay (RFC 2833), DTMF via SIP INFO | ||
Control | MGCP (RFC 2- 05), H.323 (V4), SIP (RFC 3261) |
Protocols |
|
Media | SRTP |
Control | H.235, IPSEC, TLS/SIPS |
Management | HTTPS, Access List, IPSEC |
Power | 100-240 V AC/50-60 Hz or -48V DC* | ||
Environmental |
Operational: 5 to 40o C 41 to 104o F Storage: -25 to 85o C -13 to 185o F Humidity: 10 to 90% non-condensing |
||
Dimensions | 42x172x220mm | 42x172x220mm | 44x445x269mm |
Mounting | Rack mount, Table top, Wall mount |
Message Waiting Indication | Applying 100V DC online for lighting bulb in handset, FSK, Stutter Dial Tone |
High Availability |
PSTN Fallback: Support of PSTN fallback due to Power failure, if the IP connection is down or due to customer defined IP QOS thresholds Stand Alone Survivability (SAS): Supports SAS of up to 25 SIP users (UA) per MediaPack |
Short and long Haul | REN3: Up to 5.5km (24 AWG line for single phone) |
Ring voltage | Sine: 54 V RMS typical (balanced ringing only) |
Ring Frequency | 25-100Hz |
Maximum Ringer Load | REN3 |
Loop Impedance (including phone impedance) |
Up to 1500 ohm for the MP-11x, Up to 1600 ohm for the MP-124 |
Lifeline | Supported in all ports of Mixed FXS/FXO and in first port of MP-114/FXS and MP-118/FXS using special Lifeline cable |
Caller ID | Bellcore GR-30-CORE Type 1 using Bell 202 FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil, British and DTMF ETSI CID (ETS 300-659-1) |
Polarity Reversal / Wink | Immediate or smooth to prevent erroneous ringing |
Metering Tones | 12/16 KHz sinusoidal bursts, Generation on FXS |
Distinctive Ringing | By frequency (15-100 Hz) and cadence patterns |
EMC |
EN55022 Class B , CFR Part 15 Class B, EN55024, EN61000-3-3, EN61000-3-2, VCCI Class X1 (equals to class B) |
Safety |
EN60950-1 Safety of information technology equipment, UL60950-1 Including compliance to section 6 (over voltage protection). |
Telecom | TRR-21, TIA-968 |
* -48V DC is supported only on the MP-124D
The MediaPack Series Analog VoIP Gateways are cost-effective, best-of-breed technology products. These stand-alone analog VoIP Gateways provide superior voice technology for connecting legacy telephones, fax machines and PBX systems with IP-based telephony networks, as well as for integration with new IP-based PBX systems. These products are designed and tested to be fully interoperable with leading Softswitches, SIP servers and H.323 gatekeepers.
MediaPacks are well suited for commercial VoIP deployment because of their mature and field-proven voice and fax technology. Their rich feature set allows integration with a wide range of Carriers and Enterprise network applications. MediaPack gateways are used by Carriers and Service Providers in Access networks for connecting Multi-Tenant Units (MTU), IP Centrex subscribers, payphones and rural users over various wireless and satellite links. Enterprises use MediaPack gateways to connect their legacy PBX systems over an IP infrastructure. In addition, in IP Centrex and central IP-PBX applications, the MediaPack increases the remote
location availability and provides Stand Alone Survivability (SAS) when there is no IP connection between branch locations and the central SIP servers, SIP Proxy or central IP-PBX.
Deliver Feature-rich Solutions
MediaPacks are third generation products that have been designed to meet real market needs. In addition to superior voice technology, the products provide advanced telephony features such as long-haul, metering tones generation, country dependent MWI and CID for true integration
with the existing telephony infrastructure. A variety of management and provisioning tools, such as AudioCodes’ EMS, embedded web server, Telnet and SNMP enable fast deployment and management of large and complex networks. MediaPacks are based on VolPerfect™ architecture, AudioCodes underlying, best-of-breed, core media gateway technology for all of its
products.
Provide Interoperability
MediaPacks are part of AudioCodes’ complete family of stand-alone VoIP Gateways for OEM system integration. Throughout the years, AudioCodes has invested significant effort in complying with the leading and evolving VoIP standards. Support of multiple VoIP control protocols has been tested with leading Softswitch vendors. As a provider for OEMs, System Integrators and Network Equipment Providers, AudioCodes offers short time-to-market
with field-proven products.
Benefit From Extensive Experience
AudioCodes, established in 1993, is one of the world’s leading providers of VoIP technology. AudioCodes’ commitment to innovation yields consistently high-quality voice processing products that are feature-rich and field-proven. AudioCodes has deployed tens of millions of VoP ports
in over 100 countries to date.
MediaPack Series Features
Audiocodes Enterprise Access Media Gateways Analog Media Gateways MediaPack 1xx ,About MP-112 ,MP-114,MP-118,MP-124D.Contact Us E-mail:voip@163.com Phone Number 13424004466